Dynavector DV-20X has a solid aluminium alloy body similar to the XX-2. The cantilever is a 6mm length of hard aluminium pipe with a Micro-Ridge stylus. The magnetic flux damping and softened magnetism along with powerful neodymium magnets gives the 20XH a healthy 2.8 mV output - suitable for most MM inputs. The 20XL has an output of 0.3 mV ideal for most MC phono stages.
Both high and low versions of their 20X are available ensure for the optimum end result. The high output model is most suited to valve preamplifiers or electronics that only offer MM inputs whilst the low output version offers superb performance when combined with dedicated moving coil inputs.

• Type High/Low output moving coil cartridge with flux damper and softened magnetism
• Output Voltage 2.8mV / 0.3mV (at 1KHz, 5cm/sec.)
• Channel Separation 25 dB (at 1KHz)
• Channel balance 1.0 dB (at 1KHz)
• Frequency response 20 - 20,000Hz ( 2dB)
• Compliance 12 x 10-6 cm/dyn
• Tracking force 1.8 - 2.2grams
• DC resistance 150 ohms / 5 ohms
• Recommended load
• resistance > 1Kohms / > 30 ohms
• Cantilever 6mm length, hard aluminium pipe
• Stylus Micro-Ridge

Click here for more information.